| Technical Data | |
|---|---|
| Jacket material: | stainless steel 1.4541 or 1.4828 Inconel and Incoloy |
| Operating temperature: | Up to 750°C at the jacket of the Tubular Heater |
| Operating voltage: | 230V, others on request |
| Insulation material: | Magnesium oxide pure MGO |
| Diameter tolerance: | ± 0,1 mm |
| Length tolerance: | ± 2 % min. ± 5 mm |
| Connection thread: | Ø 6,5 mm Ø 8,5 mm Ø 10 mm Ø 15 mm |
| Heat conductor: | NiCr |
| Connection pins: | Ø 6,5 mm without thread Ø 8,5 mm with M4 Ø 15 mm with M4 or M6 |
| Non heated length: | from 30 mm |
| High voltage capacity: | 1500 Volt AC |
| Insulation resistance: | cold 5 MOhm at 500 Volt DC |
| Capacity tolerance: | ± 10 % max., others on request |