| Technical Data | |
|---|---|
| Jacket material: | 1.4541 or 1.4301 |
| Wall thickness: | 5mm |
| Operating temperature: | 750°C at the jacket of the Tubular Heater |
| Load: | Up to 15 W/cm² (max. load 3.5A) depends to surface temperature |
| Operating voltage: | 230 Volt |
| Fitting: | H9 drilling Outer dimension DIN ISO 2768g |
| Length tolerances: | Length 30 100mm: –3 mm Length 101 150mm: – 4mm Length 151 300mm: –5 mm |
| High voltage stability: | 1500Volt AC |
| Standard design: | 1200Volt AC |
| Insulation resistance: | > 5 MOhm at 500Volt DC |
| Derived power (cold): | 0,5mA at 253 Volt DC |
| Capacity tolerance: | – 10 % (–5 % on Request) |