| Technical Data | |
|---|---|
| Types: | BM: Flat Heater BDM: Flat Heater with steel pressure plate (solid combined together) RAM: Frame Heater with steel clamp frame, internal band (Heater) 2 parts, diagonally split, solidly joined with the Heater on the connection side, loose on the counter side, 2 connections or interconnected with opposite for one connection |
| Material: | Stainless steel Steel pressure plate (5 mm or 8 mm thick) |
| Operating temperature: | up to 450°C max measured at surface of heated side |
| Load: | up to 6.0W/cm² max. |
| Operating voltage: | 230/250V others on request |
| Deposit: | BM: approx 5 mm (only Heater) BDM: approx. 13 mm (Heater with 8 mm steel pressure plate) RAM: Approx 13 mm (Heater with 8 mm clamp frame) |
| Minimum dimension: | BM/BDM 80x38mm (length x width) RAM 80x80x38 mm (length x width x height) |
| Maximum dimension: | B/BD 1000x350 mm (length x width) Width from 38 mm/50 mm in 10 mm steps RA 500x500x250mm (length x width x heigth) Heigth from 38 mm/50 mm in 10 mm steps |
| Connection: | with clamp, plug or leads |
| Clamp gap type RAM: | each side min 6 mm |
| Fixing holes: | Diameter 6 mm – for M5 thread Diameter 7 mm – for M6 thread Diameter 9 mm – for M8 thread Diameter 11 mm – for M10 thread Diameter 13 mm – for M12 thread (for optimum contact with the heated surface) |
| Position and distribution: | 15 mm from edge and with maximum separation in x-y axis from 130 mm |
| RAM Frame Heater fixing: | By hexagon head screws on all 4 corners or with L-shape at 2 corners diagonal |